| |
The PAC011
is a fully featured single board computer using Motorola's MC68376 32-bit
microcontroller. The board has a rich set of hardware features to enable
it to control a variety of applications, test rigs, general prototyping
etc.
- Powerful
Motorola 32-bit MC68376 microcontroller, using the CPU32 instruction
set. Programmable up to 20 MHz.
- 1 Mbtye
Flash memory 16 bits wide for program storage.
- 128 Kbyte
x 8 battery backed SRAM.
- 64 Kbyte
x 8 serial EEPROM for long term data storage.
- Real time
clock / calendar.
- 24 digital
inputs, individual link selectable to switch PNP or NPN.
- 24 digital
outputs. All outputs PNP, Drive capability 4 amps per 4 channels.
- 4 channels
0-10 volt (link selectable 0-20ma) analogue inputs.
- 4 channels
0-10 volt analogue outputs.
- 3 Serial
communication channels. Individually selectable for RS232, RS485 full
duplex, RS485 half duplex.
- 1 channel
CANbus interface at 1 Mbits/second. Full implementation protocol CAN
2.0 A and B.
- 10 way Motorola
recommended BDM header for development support in 68000 assembler or
'C' languages. Addition of PAC018 debug board allows full program debugging,
hardware breakpoints etc. via PC.
- On board
support for programming on-board Flash memory via PC COM port.
- Direct interface
to 2 PAC003 vibrator drive boards, PAC013 and PAC017 digital input /
output daughter boards.
- QSPI interface
to PAC012 LCD display / keypad.
- All interfaces
fully opto-isolated.
- Single 24
volt supply. Reverse voltage protected.
- All connectors
simple screw terminal blocks, 5.08 mm pitch.
- Board size
210 x 297 mm (A4).
|
|
